Teac DM-24 Quick Start - Manual (Page 12)

The EQ settings on the DM-24 are made using the PODs (immediately below the screen)
or the four rotary encoders to their left.
1
Press the SEL key of the channel to be
edited.
2
Press the MODULE key and then soft key 2
to jump straight to the EQ screen.
Choose one of the four EQUALIZER band
selection keys to begin manipulating the
frequency content of the program material on
this channel.
3
4
Use the graphical display at the top of the
screen to see the EQ response curve.
The
EQUALIZATION ON key (to the right
of the band selection keys) turns the EQ on
and off for instant A/B comparisons.
12
Setting EQ in the modules
DM-24 Quick Start Guide