Thinklogical Velocitykvm-4, 5, 8, 24, 28, 34, 35 & 38 Manual - Manual (Page 34)

V e l o c i t y K V M E x t e n d e r P r o d u c t M a n u a l , R e v . B , J a n u a r y , 2 0 1 4 Page 34
Naming the Transmitter Unit
Modify the name of the unit through the Transmitter. The name entered on the
Transmitter will display on the Receiver unit.
Using the arrow down button, scroll down to *System as shown below.
Using the right arrow, scroll right until Tx Ctrl is displayed (below), then press enter.
Using the right or left arrow, scroll until the blinking cursor is under the letter/number you want to change.
Using the up or down arrow, scroll (holding down the up or down arrow will scroll faster) until you find the
appropriate letter/number, then press enter.
Thinklogical
Velocity Tx VXX.XX
*System
Tx Ctrl
Name= TxUnit01
TX Ctrl
Name= TxUnit01
Tx Ctrl
Name= TxUnit11