System features, Velocitykvm extender options – Thinklogical Velocitykvm-4, 5, 8, 24, 28, 34, 35 & 38 Manual User Manual
Page 9
V e l o c i t y K V M E x t e n d e r P r o d u c t M a n u a l , R e v . B , J a n u a r y , 2 0 1 4
Page 9
System Features
Each VelocityKVM Fiber system includes the following features:
•
Supports all single-link DVI video resolutions (VelocityKVM-5 analog RGB resolutions as well).
•
Supports all Dual-Link DVI resolutions (VelocityKVM-8, -28, -38).
•
6.25 Gbps signal transmission via fiber optic cable; No RF interference.
•
Requires one to five fiber optic cables, depending on model and application.
•
Flawless image quality with no frame dropping.
•
Local KVM connections on transmitter.
•
Additional video output(s) on the receiver.
•
Extends KVM, audio and serial signals up to 350 meters using 50/125µm multi-mode fiber and up
to 1000 meters using type OM4 fiber.
•
Extends KVM, audio and serial signals up to 40 kilometers using single mode optics.
•
USB HID compliant, 4-port hub.
•
BNC Stereo Emitter (3D)
•
Full duplex stereo audio
•
USB 2.0 compliant (high speed 480 Mbps, 4 port hub).
•
(Optional) IEEE1394 FireWire 9-pin hub (Requires 2 additional fiber optic cables.)
•
(Optional) Automatic Fail-Over (see page 53)
•
(Optional) Separate Data Paths for keyboard/mouse
•
(Optional) RS-422 serial port for controlling broadcast equipment
•
DDC2B/EDID complaint.
•
Fully compatible with all of Thinklogical’s VXRouter line of products.
•
Full keyboard and mouse emulation through the transmitter
•
Simple plug and play
•
Thinklogical’s VelocityKVM Extenders are designed and identified as Class 1 Laser products.
VelocityKVM Extender Options
VelocityKVM Extenders come with a variety of peripheral device options that include or
eliminate several types of USB and FireWire, Network ports and Separate Data Paths.
The examples on pages 10 -12 are shown with the VelocityKVM-24 Tx and Rx with LC-type
connectors. All extender models follow the same format for all connector types and option
configurations.
The options include combinations of, with or without, such features as:
•
USB HID, USB 2.0 and/or FireWire
•
Separate data paths
•
10/100 NIC Network ports
•
Professional audio plug-in modules (TOSLINK, AES, S/PDIF)
Note: Thinklogical will no longer support the hardware required for USB 1.1. Thinklogical
will continue software support for all USB 1.1 units. Contact
.