Thinklogical TLX Matrix Switch SNMP Traps - Manual (Page 23)

®
TLX Matrix Switch SNMP Traps Manual 19 Rev. E - July, 2015
Symbols found on the product
Markings and labels on our products follow industry-standard conventions. Regulatory markings
found on our products comply with domestic and many international requirements.
Regulatory Compliance
Thinklogical’s
®
products are designed and made in the U.S.A. These products have been tested by
a certified testing laboratory and found to be compliant with the following standards (both domestic
USA and many international locations):
North America
Safety
ANSI/UL60950-1: 1 st Edition (2003)
CAN/CSA C22.2 No. 60950-1-03
CENELEC EN 60950-1, 1 st Edition (2001)
LASER Safety
CDRH 21CFR 1040.10
Class 1 LASER Product
IEC60825:2001 Parts 1 and 2
Class 1 LASER Product
Electromagnetic Interference
FCC CFR47, Part 15, Class A
Industry Canada ICES-003 Issue 2, Revision 1
Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures.
European Union
Declaration of Conformity
Manufacturer’s Name & Address: Thinklogical, LLC
®
100 Washington Street
Milford, Connecticut 06460 USA
These products comply with the requirements of the Low Voltage Directive 72/23/EEC and the EMC
Directive 89/336/EEC.
Standards with Which Our Products Comply
Safety
CENELEC IEC 60950-1 2 nd Ed. 2005
Electromagnetic Emissions
EN55022: 1994 (IEC/CSPIR22: 1993)
EN61000-3-2/A14: 2000
EN61000-3-3: 1994