Appendix b: gui – Thinklogical HDMI to SDI Converter Manual User Manual
Page 22
Revision A
22
October 2011
APPENDIX B: GUI
The graphical user interface (GUI) for the HDMI to SDI Converter was developed for ease of use to
create, set, and recall custom configurations. There are 6 main menus that allow you to configure the
Input/Output, Video Processor, Audio, User Configurations, Xtreme 3G and System Information.
There are sub-menus under the video processor menu for Video Control and Picture Control.
Note:
When power has been cycled on a unit it will reset to factory settings unless the “Set
Power On Config” has been set in the User Menu.
Input/Output Menu
This menu allows you to select the input and the format of the output. There is also an option to select
the 3D output as well as Enable Genlock.
By clicking the “Take” button at the bottom of the screen you
are able to commit the output format that you have selected.