Thinklogical HDMI to SDI Converter Manual - Manual (Page 38)

Revision A 38 October 2011
e: Toggle RS422 DCE/DTE
Changes the communication behavior of the RS422 (Valid only if EXtreme 3G+ option is installed).
MAIN MENU G: System Information
The following is used for retrieving information regarding current setup and signal detection information.
The 'Get Input Info', 'Get Output Info' will display the signal format only on the Front Panel whereas the
other communications interfaces will display more verbose information.
a: Get Software Version
Displays the System’s software version number
b: Get FPGA Version
Displays FPGA version number
c: Get LINUX Version
Displays the version of software running on the Ethernet device.
d: Get Local Temperature
Displays the temperature inside the box
e: Get Input Info
Displays Information about the video and embedded audio signal on BNC Input.
f: Get Output Info
Displays Information about the video and embedded audio signal on SDI Output.
g: Get Genlock Info
Displays Information about the Genlock status.
h: Get Xtreme 3G Info
Displays Information about the Xtreme 3G transmit card (If installed).