Tri Tool 602TSB Clamshell Air User Manual
Page 18
18
TRI TOOL INC.
92-0139 : Rev.131230
NOTE:
LUBRICANT RECOMMENDATIONS
The Drive Gears require a high string lubrication grease such as “Chevron Utility
Grease, light, high string for gears” (P/N 68-0020).
The Slide Rails and Tool Blocks require a light oil such as SAE 10 light machine oil.
The Feed Screw for the Tool Block and the Tripper Block Assy require a SAE 10 light
machine oil for normal conditions, and under dusty conditions a silicone, graphite or
molybdenum disulfide ‘dry’ lubricant.
A light film of all purpose grease may be used, but it must be checked for grit
contamination frequently.
The Air Motor requires a Class 2 lubricant, viscosity of 100 to 200 SSU at
100°F (38°C) minimum aniline point of 200°F (93°C).
TRI TOOL Inc. – Air Tool Lubricant (P/N 68-0022)
AMOCO – American Industrial Oil no. 32
Atlantic Richfield – Duro Oil S-150
Chevron – A.W. Machine Oil 32
Exxon – Nuto H32
Shell – Tellus Oil 32
The bearings in the Air Motor are sealed and do not require any lubrication.