Tri Tool 602TSB Clamshell Air - Manual (Page 8)

8
TRI TOOL INC.
92-0139 : Rev.131230
Cutting Capacities on 1 1/2" through 2" (38.1 mm through 50.8 mm) OD tube
Note: Capacity exceeds the maximum wall thickness for small tube sizes
Severing with Standard procedures .40" (10.2 mm) wall
Severing with Special procedures .80" (20.3 mm) wall
Severing with Single Beveling .40" (10.2 mm) wall
Severing with Double Beveling .40" (10.2 mm) wall
Clearances
Rotating Parts Diameter 4.98" (126.5 mm)
Main Frame Diameter 4.98" (126.5 mm)
Axial Clearance required relative to Center-Line of the cut
Mounting side 4.00" (101.6 mm)
Side Opposite of the frame .68" (17.3 mm)
Radial Clearance over the Tube
"Tube Size"
Clearance Standard
Tool Blocks
2.00" 50.8 mm 1.49" 37.8 mm
1.75" 44.5 mm 1.62" 41.1 mm
1.50" 38.1 mm 1.74" 44.2 mm