Tri Tool 620SB Clamshell Air - Manual (Page 3)

3
Model 620SB Low Profile Clamshell, Air
92-0220 : Rev. 131230
SAFETY PRECAUTIONS
WARNING:
IN GENERAL
When using rotating head cutting equipment, basic safety precautions should always
be followed to reduce the risk of personal injury.
Operate this tool only in accordance with specific operating instructions.
Do not override the deadman switch on the power unit. Locking down,
obstructing, or in any way defeating the deadman switch on the power drive
unit may result in serious injury.
DRESS CONSIDERATIONS
Use standard safety equipment. Hard hats, safety shoes, safety harnesses,
protective clothes, and other safety devices should always be used when
appropriate.
Use safety glasses. Do not operate cutting tools without eye protection.
Dress properly. Do not wear loose clothing or jewelry. They can be caught in
rotating and moving parts. Avoid slippery floors or wear nonskid footwear. If you
have long hair, wear protective hair covering to contain it.
WORK AREA
Keep the work area clean.
Keep the area well lit. Keep electrical cords, cables, rags, rigging straps, and etc.
clear of rotating equipment. Do not use power-cutting tools in the presence of
flammable liquids and gasses.
Keep visitors away. Do not let visitors or untrained personnel at or near operating
tools. Enforce eye protection requirements for all observers.
Do not over reach. Keep proper footing at all times.
Stay alert. Watch what you are doing. Use common sense. Do not operate tools
when you are tired.