Tri Tool 620SB Clamshell Air - Manual (Page 6)

6
TRI TOOL INC.
92-0220 : Rev. 131230
GENERAL DESCRIPTION
The Model 620SB Low-Profile Clamshell (P/N 01-1146) is a split-frame pipe lathe
designed for severing and beveling in-line pipe with a minimum range of 16” through
20” pipe with minimal radial and axial clearance.
Using standard Tool Blocks the Model 620SB may be configured to perform the
following operations:
Sever in-line pipe.
Sever and bevel in-line pipe.
Sever and double bevel in-line pipe.
DESIGN AND OPERATING FEATURES
The easily adjustable precision bearing surfaces pre-load and stabilize the rotating
head to provide long life, low maintenance, stability, and precision.
The Clamshell splits into two halves for mounting on closed loop systems.
All parts are secured to the two halves, thus avoiding the loss of parts and at the
same time providing maximum ease of handling.
The Clamshell is equipped with Adjustable Clamping Pads and Jackscrews for
out-of-round pipe conditions.
Dual Tool Blocks with Auto-feed Sprockets and Adjustable Slides provide maximum
maintainability, life, and operator safety, with a minimum of operator training.
The Auto-feed Sprockets provide .004” (.10 mm) of radial feed per revolution of the
Headstock for a controlled depth of cut.
The drive gears and bearing surfaces are covered for operator safety and are sealed
to provide protection from dust and chips.
The operator’s controls are located away from the rotating Headstock for the
operator’s safety.
A modular design concept provides quick, easy maintenance and maximum
versatility in the drive and tooling options.
Two detachable right angle Air Motors provide maximum handling ease and low
axial clearance.