Tri Tool 620SB Clamshell Air - Manual (Page 8)

8
TRI TOOL INC.
92-0220 : Rev. 131230
Cutting Capacities* on 12" through 20" Pipe
Note: Capacity may exceed the maximum wall thickness for small pipe sizes
Severing with standard procedures 2.50" (63.5 mm) wall
Severing and single beveling 1.25" (31.8 mm) wall
Severing and double beveling 1.25" (31.8 mm) wall
Severing and beveling with special procedures 2.00" (50.8 mm) wall
Clearances
Rotating parts diameter 33.25" (844.6 mm)
Main Frame diameter 29.20" (741.7 mm)
Axial clearance required relative to center-line of the cut:
Mounting side 7.58" (192.5 mm)
Side opposite of the frame 1.56" (39.6 mm)
Radial Clearance Over the Pipe or Tube
Pipe Size True Diameter Clearance Tool Blocks
20" 20.00" 508 mm 6.63" 168.4 mm
18" 18.00" 457 mm 6.63" 168.4 mm
16" 16.00" 406 mm 6.63" 168.4 mm