Triplett Hound 3 – PN: 3392 - Manual (Page 3)

3
2: Product Features:
2.1: Traces FOX and FOX 2 signals through drywall,
plaster, and wood frame construction
2.2: Picks up FOX or FOX 2 signals from a foot away
2.3: Identifies target wires without stripping off insulation
2.4: Adjustable Volume / Sensitivity control
2.5: Built in white LED illuminators for use in poorly
illuminated areas
2.6: Improved amplifier gain for higher sensitivity traces
2.7: Bandpass filter peaks signal sensitivity while
suppressing 60Hz
2.8: Conductive plastic duckbill probe provided for deep wire
bundle penetration and non-shorting performance
2.9: Metal probe provided for contact probing
2.10: Rugged, moisture resistant, mylar cone speaker with
high strength alnico magnet
2.11: Earphone jack for use in high noise areas
2.12: Improved performance LED signal strength indicator
works even when earphone is used
2.13: Uses common 9 volt battery
2.14: Convenient door for easy battery replacement
2.15: Internal shielding suppresses feedback