Triplett Hound 3 – PN: 3392 - Manual (Page 5)

5
3.6:
Use caution when working with any long unconnected wire
or cable. Under some conditions, unconnected wires may
“float up” to dangerous potentials, and touching them may
result in user injury.
4: Specifications:
4.1: Amplifier
High impedance bootstrapped FET input for high gain and
sensitivity. Incorporates a bandpass filter to improve sensi-
tivity to FOX signals while suppressing 60Hz.
4.2: Speaker
1 1/2" mylar coned speaker with high strength alnico mag-
net is rugged and moisture resistant.
4.3: Probes (2 provided)
a) Solid aluminum conical probe for low resistance contact
testing
b) Carbon filled nylon duckbill probe with metal threads for
sensitive non-shorting testing.
4.4: Earphone Jack
Accepts standard 1/8" (3.5mm) mini phone plug, either mono
or stereo. For use with electromagnetic (dynamic) earphones
from 8 Ohms to 2000 Ohms. Automatically mutes loud-
speaker when earphone is used. An earphone with a shielded
cable is suggested to reduce the possibility of feedback from
the cable to the probe tip.