Vantage Point E58E User Manual

Model e52a - assembly instructions, Modelo e52a - instrucciones de ensamblaje, Modèle e52a - instructions d’assemblée

Advertising
background image

.75”

11.75”

1.75”

13.00”

12.125”

18.375”

36.75”

Articulating Flat Panel Mount

Assembly Instructions (E52A)

Model E52A - Assembly Instructions

NOTE! Hardware has been included for Wood Stud and Solid Concrete Wall Construction. Hardware is not intended for use on Metal Stud, Hollow Wall and Cinder Block Wall installation. Preview
all steps before beginning. Should any portion of these instructions be unclear, or if you have any doubts as to the proper assembly and installation, please contact us for assistance at 800-582-

9595 for assistance. CAUTION - Do not exceed maximum weight indicated. Use with heavier than the maximum weight indicated may result in instability causing possible injury. Use of this
product for any other purpose unless specifi ed by Vantage Point Products is not recommended. Think Safety First!

Modelo E52A - Instrucciones de Ensamblaje

Revise todos los pasos antes de empezar. Si alguna parte de las instrucciones no queda clara, contacte a un contratista califi cado, persona habilidosa o llámenos directamente al 800-582-9595
para recibir asistencia. No trate de instalar este producto de Vantage Point si tiene cualquier duda sobre su adecuada instalación. PRECAUCIÓN- Este sistema de anaqueles está ideado para

ser usado únicamente con el peso máximo indicado. Usarlo con uno mayor que el máximo peso indicado podría provocar inestabilidad causando posibles lesiones. El uso de este producto para
cualquier propósito que no sea el especifi cado por Vantage Point Products no es recomendado. ¡Piense en la seguridad primero!

Modèle E52A - Instructions d’Assemblée

REMARQUE : Les pièces incluses sont exclusivement destinées à être utilisées sur des structures ayant des montants en bois et des murs en béton plein. Elles ne doivent pas être utilisées pour
une installation sur des montants en métal, des murs creux ou des murs en bloc de béton d’escarbilles. Lisez attentivement toutes les étapes avant de commencer. Si une portion quelconque
de ces instructions n’est pas claire, veuillez nous contacter directement pour obtenir de l’aide. N’essayez pas d’assembler ce support Vantage Point pour écran plat si vous avez des doutes

quelconques relativement à son assemblage correct et à sa bonne installation. ATTENTION – Ne dépassez pas le poids maximum indiqué. Tout dépassement du poids maximum indiqué pour-
rait provoquer une instabilité et possiblement un accident. L’utilisation de ce produit pour tout autre usage n’est pas recommandée à moins d’être précisée par Vantage Point Product. Pensez
à la sécurité avant tout !

Modell E52A - Assemblerbefehle

HINWEIS! Befestigungsteile für Holzrahmenwerk und massive Betonwände sind enthalten. Die Befestigungsteile sind nicht für eine Montage an Metallträgern, Hohlwänden und Löschbeton-
mauern bestimmt. Vor Montagebeginn sollten alle Schritte durchgelesen werden. Sollte ein Teil dieser Anweisungen unverständlich sein, rufen Sie uns bitte unter der Nummer 800-582-9595 an.
Bei jeglichen Zweifeln in Bezug auf die richtige Montage und Befestigung sollte nicht versucht werden, diese Vantage Point Flachmonitor-Halterung trotzdem zu installieren. ACHTUNG - Das

angegebene Höchstgewicht darf nicht überschritten werden. Bei Verwendung für eine höheres als das angegebene Gewicht besteht die Gefahr von Instabilität und Verletzungen. Von einer
Verwendung dieses Produkts für andere als die von Vantage Point empfohlenen Zwecke wird abgeraten. Zuerst immer an die Sicherheit denken!

Model

E52A

Wall Mount

150 lbs / 68.03 kg

13 in / 33.02 cm

36.75 in / 93.34 cm

12.125 in / 30.79 cm

33.55 lbs. / 15.20 kg.

Application

Max Weight Load

Width

Height

Product Weight

Depth

Modelo

Application

Peso Máximo

Anchura

Altura

Peso del producto

Profundidad

Modèle

Application

Poids Maximum

Largeur

Taille

Poids de produit

Profondeur

Modell

Application

Hochstgewicht

Breite

Höhe

Produkt-Gewicht

Tiefe

SPECIFICATIONS

Vantage Point Products Corp • P.O. Box 2485 Santa Fe Springs, CA 90670 USA Tel: 1.800.582.9595

• Canada Tel: 888.876.6786 • Europe Tel: 31.72.581.6056 • Web Site: www.vanptc.com • Email: [email protected]

Option: 1 Mounting

Option: 2 Mounting

Extension rails

Base rails

3

3

1

1

2

2

GARANTIEHINWEISE

Alle Produkte der Vantage Point Products Corp. werden mit größter Sorgfalt zur Gewährleistung hervorragender Qualität, Leistung und lebenslanger Haltbarkeit
hergestellt. Die Garantie deckt Material- und Verarbeitungsfehler unter der Voraussetzung des normalen und angemessenen Gebrauchs. Vantage Point Prod-
ucts wird die nach einer Inspektion als defekt befundenen Produkte nach eigenem Ermessen entweder reparieren oder ersetzen. Diese Garantie gilt nicht für
Produkte, die aufgrund von zweckfremder Verwendung, Missbrauch, Unfall, Modifi zierung oder Änderung durch eine nicht von uns autorisierte Person, nicht
anleitungsgemäße Verwendung oder falsche, nicht unseren Anweisungen entsprechende Montage ausfallen oder beschädigt werden. Diese Garantie ist nicht
auf neue Besitzer übertragbar. Bei Ansprüchen wird eventuell ein Kaufbeleg verlangt. Alle Ansprüche müssen direkt bei Vantage Point Products Corp. unter der

Nummer 1-800-582-9595 eingereicht werden.

GARANTIE

Tous les produits Vantage Point Products sont fabriqués pour assurer une haute qualité, une excellente performance et une grande durabilité. La garantie
couvre le produit contre les vices de matériaux et de fabrication sous des conditions d’utilisation normales et raisonnables. Vantage Point Products réparera ou
remplacera, à son choix, tout produit qui s’avère défectueux suite à son inspection. Cette garantie ne s’applique pas aux produits perdus ou endommagés à
cause d’un mauvais usage, d’un abus ou d’un accident, à ceux qui ont été changés ou réparés d’une manière quelconque par une personne ou une entreprise
autre que celles que nous reconnaissons, utilisés contrairement aux instructions ou mal assemblés, ou utilisés d’une manière que nous n’avons pas prescrit.

Cette garantie n’est pas transférable à un nouveau propriétaire et une preuve d’achat pourrait être exigée.Toutes les réclamations doivent être adressées

directement à Vantage Point Products Corp. en nous appelant au 1-800-582-9595.

WARRANTY INFORMATION

All Vantage Point Products Corp. products are manufactured to ensure superior quality, performance and durability for a lifetime of use . Warranty covers the
product to be free of defects in materials and workmanship under normal and reasonable use. Vantage Point Products will repair or replace, at our option, any
product which proves to be defective upon our inspection. This warranty will not apply to products that have been lost or damaged by misuse, abuse or accident,
altered or repaired in any way or by any person or fi rm other than specifi ed by us, used in violation of instructions or incorrect assembly nor used in a manner
other than specifi ed by us. This warranty is nontransferable to a new owner and may require proof of purchase. All claims must be directly handled with Vantage

Point Products Corp. by calling us at 1-800-582-9595.

INFORMACIÓN SOBRE LA GARANTÍA

Todos los productos de Vantage Point Products Corp. son fabricados para asegurar una calidad, rendimiento y durabilidad superiores para una vida de largo
uso. La garantía cubre que el producto esté libre de defectos en materiales y mano de obra bajo uso normal y razonable. Vantage Point Products reparará o
reemplazará, a su discreción, cualquier producto que resulte defectuoso al ser inspeccionado. Esta garantía no aplica a productos que han sido perdidos o

dañados por uso incorrecto, abuso o accidente, que han sido modifi cados o reparados en cualquier manera o por cualquier persona o compañía no

especifi cada por nosotros, usado en violación de las instrucciones o por ensamblaje incorrecto ni que se ha utilizado de manera no especifi cada por nosotros.
Esta garantía no es cedible a un nuevo propietario y podría requerir prueba de compra. Todos los reclamos deben ser manejados directamente con Vantage

Point Products Corp. llamándonos al 1-800-582-9595.

Rotación y giro
Rotation et le pivotement
Rotation und Schwenkbewegung

Rotation and swivel

Vantage Point Products Corp • P.O. Box 2485 Santa Fe Springs, CA 90670 USA Tel: 1.800.582.9595

• Canada Tel: 888.876.6786 • Europe Tel: 31.72.581.6056 • Web Site: www.vanptc.com • Email: [email protected]

.75”

1.90cm

11.75”

29.85cm

12.125”

30.79cm

36.75”

93.34cm

18.375”

46.67cm

1.75”

4.44cm

13”

33.02cm

E52A.PDF

REV: 01FEB08FIR

Advertising
This manual is related to the following products:
Table of contents