Vantage Point SATP - Manual

IMPORTANT CONSIDERATIONS PRIOR TO INSTALLATION
Preview all steps before beginning. Should any portion of these instructions be unclear, contact us at 800-582-9595 for assistance. Do Not Attempt to
install this speaker mount if you have any doubts as to its proper installation. This speaker mount is specifically designed for mounting small surround
style speakers weighing 8 lbs. or less. Use of this speaker mount for any other purpose unless specified by the manufacturer is not recommended.
Before you begin, separate the speaker mount parts by loosening the set screws with the supplied allen wrench and simply twist apart.
“TOGGLER is a registered trademark of Mechanical Plastics Corp.” ALLIGATOR® ANCHOR
“Patented under US Patent numbers 4,181,061; 4,752,170 and 5,161296 and foreign counter-
parts thereof. Other patents pending.”
C - 1/4”-20 x 1/2” machine screw (4)
D - 1/4”-20 x 7/8” machine screw (2)
G - #8 x 3/4” self tapping screw (2)
I - #12 x 1-3/4” self tapping screw (4)
H - #12 x 3/4” self tapping screw (4)
B - 8-32 x 5/8” machine screw (2)
A - M5 x 20mm machine screw (2)
E - M5 x 1/8” plastic washer (2)
J - #12-14 TOGGLER® ALLIGATOR
plastic anchor (4)
L - 5/32” allen wrench (1)
F - 8-32 round key hole nut (2)
K - M4 x 8mm flat head
machine screw (2)
Speaker / Wall Plate (4)
Speaker Post (2)
Speaker / Wall Plate (4)
2-1/2” Extension (2)
Link Set (2)
(assembled at factory)
Exploded View
Do not use extensions
in wall mounted
applications
Vantage Point Products Corp • P.O. Box 2485 Santa Fe Springs, CA 90670 USA
USA Tel: 1.800.582.9595 • Canada Tel: 905.607.9994 • Europe Tel: 31.72.581.6056
Web Site: www.vanptc.com • Email: [email protected]
Maximum Speaker Weight: 8 lbs
WARRANTY INFORMATION
All Vantage Point Products Corp. products are manufactured to ensure superior quality, performance and durability for a lifetime of use . Warranty covers
the product to be free of defects in materials and workmanship under normal and reasonable use. Vantage Point Products will repair or replace, at our
option, any product which proves to be defective upon our inspection. This warranty will not apply to products that have been lost or damaged by misuse,
abuse or accident, altered or repaired in any way or by any person or fi rm other than specifi ed by us, used in violation of instructions or incorrect assembly
nor used in a manner other than specifi ed by us. This warranty is nontransferable to a new owner and may require proof of purchase. All claims must be
directly handled with Vantage Point Products Corp. by calling us at 1-800-582-9595.
Model SATP Satellite Speaker
Mount Assembly Instructions
Install speaker with speaker post or 2 hole plate attached. Secure the allen set screw enough to
hold assembly in place with the weight of the speaker attached. Adjust to desired
angle and secure.
Install link set portion of speaker mount to wall plate or 2-1/2” extension. Secure the allen set screw enough
to hold assembly in place with the weight of the speaker attached.
Install 2-1/2” extension portion of speaker mount to wall plate. Secure the allen set screw enough to hold
extension in place with the weight of the speaker attached.
Step 3. Installation of Extension and Link Set
Link Set Mounting
All Applications
tighten allen
screw using allen
key
provided
(L)
(L)
Extension Mounting
Ceiling or Shelf Application Only!
tighten allen screw using
allen key provided
Do not use
extension in
wall mounted
applications
(L)
2 hole speaker
plate
post style speaker
plate
Speaker Mounting (L) (L)
6i33-08/05