Vantage Point AX2ACL01 - Manual

A 3/8” dia. wall anchor (concrete only) 4
B ceiling plate with down tube 1
C #14 x 2” phillips sheet metal screw 4
D ceiling plate cover 1
E top pin retainer cover 1
F upper ring collar 1
G 6mm x 35mm flat head phillips machine screw 2
H 6mm x 20mm phillips machine screw 4
I 5mm x 12mm phillips machine screw (gold) 4
J 4mm x 12mm phillips machine screw 4
K 6mm x 20mm phillips machine screw 4
L 5mm x 20mm phillips machine screw (gold) 4
M 4mm x 20mm phillips machine screw 4
N 4.3mm i.d. x 12mm o.d flat washer 4
O 5mm short arm allen wrench 1
P left side cover 1
Q 200mm flat panel mounting plate 1
R LCD stand off spacer 10mm thick 4
S right side cover 1
T lower pin retainer cover 1
U 200mm brake zinc 1
V 4mm x 40mm socket head cap screw zinc 1
PART DESCRIPTION QTY
Maximum Flat Panel Weight:
100 lbs / 45.5 kg
Model AX2ACL01 100/200mm VESA Articulating
Flat Panel Ceiling Mount Assembly Instructions
NOTE! Hardware has been included for Wood Stud and Solid Concrete Ceiling Construction. Hardware is not intended for use on
Metal Stud, Hollow Wall and Porous Concrete type installations. Preview all steps before beginning. Should any portion of these instruc-
tions be unclear, contact us directly at 800-582-9595 for assistance. Do not attempt to assemble this Vantage Point 100/200mm Articulating
Flat Panel Mount, if you have any doubts as to its proper assembly and installation. CAUTION - Do not exceed maximum weight indi-
cated. Use with heavier than the maximum weight indicated may result in instability causing possible injury. Use of this product
for any other purpose unless specified by Vantage Point Products is not recommended. Think Safety First!
WARRANTY INFORMATION
All Vantage Point Products Corp. products are manufactured to ensure
superior quality, performance and durability for a lifetime of use . War-
ranty covers the product to be free of defects in materials and work-
manship under normal and reasonable use. Vantage Point Products
will repair or replace, at our option, any product which proves to be
defective upon our inspection. This warranty will not apply to products
that have been lost or damaged by misuse, abuse or accident, altered
or repaired in any way or by any person or firm other than specified by
us, used in violation of instructions or incorrect assembly nor used in
a manner other than specified by us. This warranty is nontransferable
to a new owner and may require proof of purchase. All claims must
be directly handled with Vantage Point Products Corp. by calling us at
1-800-582-9595.
6i86-12/05
Vantage Point Products Corp • P.O. Box 2485 Santa Fe Springs, CA 90670 USA
USA Tel: 1.800.582.9595 • Canada Tel: 905.607.9994 • Europe Tel: 31.72.581.6056
Web Site: www.vanptc.com • Email: [email protected]
A
B
C
D
E
F
Q
P
S
V
M
G
K
N
L
H
I
J
R
O
T
lb/kg
+
lb/kg
-
2X
2X
U