Vantage Point AX2WL02 User Manual
Hook
A
3/8” dia. wall anchor
(concrete only)
4
B
wall plate / tilting mechanism
1
C
100/200mm LCD mount plate
1
D
#14 x 2” phillips sheet metal screw
4
E
6mm x 10mm phillips machine screw (lcd plate)
4
F
4mm x 20mm phillips machine screw
4
G 4mm x 30mm phillips machine screw
4
H
LCD mounting spacer 4mm i.d.
4
I
5mm x 20mm phillips machine screw (gold)
4
J
5mm x 30mm phillips machine screw (gold)
4
K
6mm x 20mm phillips machine screw
4
L
6mm x 30mm phillips machine screw
4
M LCD mounting spacer 5mm-6mm i.d.
4
N
LCD stand off spacer 10mm thick
4
O
5mm short arm allen wrench
1
PART
DESCRIPTION
QTY
Maximum Flat Panel Weight: 100 lbs / 45.5 kg
Model AX2WL02 100/200mm VESA Tilting
Flat Panel Mount Assembly Instructions
NOTE! Hardware has been included for Wood Stud and Solid Concrete Wall Construction. Hardware is not intended for
use on Metal Stud, Hollow Wall and Cinder Block Wall installation. Preview all steps before beginning. Should any portion of
these instructions be unclear, contact us directly at 800-582-9595 for assistance. Do not attempt to assemble this Vantage Point
100/200mm Tilting Flat Panel Mount, if you have any doubts as to its proper assembly and installation.
CAUTION - Do not exceed
maximum weight indicated. Use with heavier than the maximum weight indicated may result in instability causing possible injury.
Use of this product for any other purpose unless specifi ed by Vantage Point Products is not recommended. Think
Safety First!
WARRANTY INFORMATION
All Vantage Point Products Corp. products are manufactured to ensure superior quality, performance and durability for a lifetime of
use . Warranty covers the product to be free of defects in materials and workmanship under normal and reasonable use. Vantage
Point Products will repair or replace, at our option, any product which proves to be defective upon our inspection. This warranty
will not apply to products that have been lost or damaged by misuse, abuse or accident, altered or repaired in any way or by any
person or fi rm other than specifi ed by us, used in violation of instructions or incorrect assembly nor used in a manner other than
specifi ed by us. This warranty is nontransferable to a new owner and may require proof of purchase. All claims must be directly
handled with Vantage Point Products Corp. by calling us at 1-800-582-9595.
6i84-12/05
Vantage Point Products Corp • P.O. Box 2485 Santa Fe Springs, CA 90670 USA
USA Tel: 1.800.582.9595 • Canada Tel: 905.607.9994 • Europe Tel: 31.72.581.6056
Web Site: www.vanptc.com • Email: [email protected]
A
B
C
D
E
F
K
H
I
J
M
L
N
G
Hook !
lb/kg
+
N
D
O
lb/kg
-
Flat Panel
Adjust
Optional Center Channel
Speaker Mount
Not Included
Contact Your Dealer
Or Call 1-800-582-9595
For Availability