Verilink PRISM 4051 (34-00253.2) Product Manual - Manual (Page 30)

24 C HAPTER 4: T ERMINAL O PERATION
Menu Structure The terminal interface opens
with a main menu allowing
four options: Alarms,
Maintenance, Configuration,
and Utilities (Figure 4 -2).
Each menu screen allows
accessing the local or far-end
menu screen.
If a keystroke is not made for ten minutes, the terminal interface automatically logs
off.
Alarms Screen The Alarms screen (Figure 4- 3) allows viewing the current alarm status of the
network and the DTE lines.
Alarms
MAIN
MENU
Log
Log
Maintenance
Configuration
Utilities
Figure 4 -2 Menu Structure
DDS Network
Parameters
DTE Port
Parameters
Off
On
Figure 4 -3 Alarms Screen
4051 DDS 255.255/1.02 P R I S M 4 0 5 1 Date: 08/23/96
(Unit Address: 1) Time: 09:11:44
-------------------------------------- ALARMS ----------------------------------
NET Alarms: LOSS
DTE Alarms: NONE
Current Threshold
Loss of Signal Seconds (LOSS): 7874 5
Out of Service Seconds (OOSS): 0 0
Out of Frame Seconds (OOFS): 7874 0
Reset Alarm Registers: (RESET)
------------------------------------ Messages ----------------------------------
NET ALARM