Verilink PRISM 4051 (34-00253.2) Product Manual - Manual (Page 43)

Software Configuration 37
Utilities The Utilities screen (Figure 4 -16) handles the functions described in the following
paragraphs.
Element ID. This field allows the entry of an ASCII string (up to 29 characters in
length) which identifies the unit to the device receiving the alarm notification
messages. This ASCII string is also displayed at the top of all terminal interface
screens.
Set Time. The current time may be entered in this field using the 24 -hour
HH : MM :SS format. For example, 3:45 a.m. is entered as 0345 and 3:45 p.m. is
entered as 1545.
Set Date. The current date may be entered in this field using the MM: DD :YY
format. For example, July 4, 1993 is entered as 070493.
New Password. This field allows entry of a password of up to 10 characters. An
empty string (Enter key only) may be entered to disable the password feature.
After Enter is pressed, the new password is activated and is no longer visible.
Therefore, type carefully when entering a new password and verify before pressing
Enter. When the terminal interface is exited and later reactivated, this password
must be entered exactly to gain access. If the wrong password is entered, the
following message appears:
Incorrect Password; Please Enter Again.
Do not exit the terminal interface program until the password procedure is fully
understood. If a password has been specified, it must be typed exactly to reenter the
program.
Figure 4- 16 Utilities Screen
4051 DDS 255.255/1.02 P R I S M 4 0 5 1 Date: 08/23/96
(Unit Address: 1) Time: 09:46:58
------------------------------------- UTILITIES --------------------------------
Element ID: ( )
Set Time: (09:46:55)
Set Date: (08/232/96)
New Password: (xxxxxxxxxx)
(Store Parameters to EEPROM)
(MAINTENANCE RESET)
------------------------------------ Messages ----------------------------------