Vinpower Digital USBShark - Manual (Page 7)

4
LCD Display & Operation Panel
*The below image is for reference only. (Actual screen may vary. )
 Up Arrow Button

Menu/Option Scroll Up
 Down Arrow Button

Menu/Option Scroll Down
 Enter/OK Button

Enter into the Menu

Execute the Function

Submit the Setting change
 Escape Button

Go back to the previous Menu

Abort the current Function.

Cancel the Setting change
F1
 Smart Copy Button

Shortcut to make a copy under Smart mode
F2
 RAW Copy Button

Shortcut to make a copy under RAW mode
F3
 Device Scan Button

Shortcut to detect available devices
F4
 Shutdown Button

Shortcut to perform Shutdown function of the system
Flash Device Port Status Indicator
Every flash device port (ex. USB, SD, CF, etc) on the system comes with 2 colored LED lights,
which indicate the current status of the port. Reference chart below to understand the LED
status readings:
GREEN LED RED LED DESCRIPTION
Blinking Off This port is active in terms of reading/writing.
On Off A flash device (ex. USB, SD, CF, etc) is connected on this port
Off Off A flash device (ex. USB, SD, CF, etc) is disconnected on this port.
Off On An error occurred on this port.