VMC VM-3 - Manual (Page 17)

VM-3 • Page 15
Remote Video In
V
These instructions assume you have completed the basic installation.
To Edit Monitor No Edit
Screen Presentation In Out
From Network Out
From Network Out
VM-3NET
VM-3NET
VM-3
The VM-3 unit is very easy to network
with other VM-3’s. Connecting VM-
3NET’s to a VM-3 Control Unit allows the
operator to send different messages and
image/video links to more than one
location or video source. This can be
done from one location while
maintaining control of the entire
network.
1. After performing the basic installation
on a VM-3NET, simply connect the din
cable pictured to the right from one VM-3
to the next. This connection is made
through the "Network" ports. The
"Network Out" Port is connected to the
next VM-3NET’s "Network In" Port. This
is repeated until all the VM-3NET’s are
connected.
2. After all the units are powered up, the
VM-3 Control Unit knows how many VM-
3NET’s are connected. Setting the
VMID’s is done from the Utilities Menu.
This gives each box a unique address.
3. VMX Pro Media Players can be installed
on any or all of the VM-3NET network units.
4. Controlling the VM-3NET’s is done
through the Routing Menu while editing
with the VM-3 Control Unit.
5. Call (203) 358-8842 if you are having a
problem completing these steps.
Remote Video In
Video Out Video Out
Installing a Network of VM-3’s
To Network In
To Network In