Welltech ePBX-100A-128 - Manual (Page 41)

41
manual: CH5.1 Application between Welltech CPE device and
ePBX-100A-128.
„ Status: Once SIP Trunk is configured and enabled, here will show the registration
status.
Press Apply to save configuration, or press Cancel to quit configuration.
3.1.6 Routing Table
Routing Table is to set routing rule of ePBX-100A-128. There are two directions to set
rules:
Outgoing Call Rule means from subscriber (Extension or Trunk registered on
ePBX-100A-128) to call out. Incoming Call Rule means call from other non-subscriber
device to ePBX-100A-128.
Enter Configuration Æ Routing Table-select direction and press Add New to set
routing table.
3.1.6.1 Outgoing Call Rule
Outgoing Call Rule means from subscriber (Extension or Trunk registered on
ePBX-100A-128) to call out.
Example 1: Routing record with prefix 03 and no limit for Digits Length. Enable Route Password
and Drop function.