Welltech ePBX-100A-128 - Manual (Page 86)

86
•
Set IP information for LP388. You can set the IP info of LP388 by its LCD, or you can also login its
WEB interface by default IP 10.1.1.3. Go to Advanced Config Æ Network Configuration to setup
network as below, then press OK and reboot your LP388. For more information about LP388,
please go to:
http://www.welltech.com/support/voip/SIP%20series/LP388/User%20Manual/WP-LP388sip.100.p
df.
•
Set IP information for WG3504. You can set the IP info of 3504 by its COM port, or you can also
login its WEB interface by default IP 10.1.1.3. Go to Network Interface page to setup network
setting as below. After set the network info, please press OK Æ Commit Data Æ Reboot System.