Welltech ePBX-100A-128 - Manual (Page 89)

89
•
This Example, we have 1 WG3504 register to ePBX-100A-128 with extension 103 to 106. You can
set the SIP Information of 3504 by its COM port or you can also login its WEB interface for
configuration as below. Set the 3504 to proxy mode, and also set the Primary Proxy IP Address
and Line Number…, etc. After configure SIP information, please press OK Æ Commit Data Æ
Reboot System. For more information about WG3504, please go to:
http://www.welltech.com/support/voip/SIP%20series/FXS%20series/user%20manual/35/FXS-SIP-
E-26.PDF .
•
If all of the above settings are correct, you can go to Information Æ Subscriber page to confirm
the register status.
Now, all of the Extensions can contact with each other. If the called party is busy or no answer,
ePBX-100A-128 will play an announcement to indicate the called party’s status.