Westermo GDW-11 - Manual (Page 31)

31 6615-2203
Response syntax:
+WOPEN: <Mode>[,<IntVersion>[<ExtVersion>]]
Parameters:
<Mode>
0:
Stop the Open-AT embedded application. If the product was running,
it resets.
1: Start the Open-AT embedded application. If the product was stopped,
it resets.
2: Get the Open AT library versions.
3: Erase the objects flash of the Open-AT embedded application.
4: Erase the Open-AT embedded application.
5: Suspend (in WAVECOM software kernel) the Open AT embedded application
tasks.
NOTE:
Mode = 3 and 4 are only available if Open-AT embedded application is stopped
(AT+WOPEN=0).
Open AT embedded applications can be resumed with AT+WOPENRES command or the
INTERRUPT feature (see +WCFM command).
<IntVersion>
ASCII string giving the internal Open AT library version.
<ExtVersion>
ASCII string giving the external Open AT library version.
*WPIN – Auto PIN Code
This command configures the modem to automatically control the SIM PIN code.
The command can be used when it’s impossible to disable SIM PIN code check in the
SIM card or when the PIN check needs to be enabled for any other reason. Since the
PIN code is stored in flash memory, the modem will send the PIN code to the SIM
automatically when it is requested.
Syntax:
AT*WPIN=<mode>, <PIN_code>
Parameters:
<mode>
0:
Disable automatic PIN code control.
1: Enable automatic PIN code control.
<PIN_code>
The SIM PIN code. A string of 4 numerical digits.