Westermo FD-20 - Manual (Page 19)

19 6630-2220
6.4.2.2.6 Insert PROFIBUS DP Slave
… Click on the symbol or choose the Insert > Slave menu to get the Insert slave
pointer, a left arrow and letter S.
… Click on the position where the slave is to be inserted.The dialog box, from which
one or more slaves can be selected, will open.
… Select a Slave by clicking on it in the list Available slaves and then click the Add>>
button to put this slave into the Selected slaves list. Several different slaves can be
selected, as well as the same slave several times. Once you have selected the required
slaves press OK.
6.4.2.2.5 PROFIBUS DP Master configuration
Double click on the master symbol or set the focus on to the master (left mouse click)
and then select Settings > Master Configuration, to open the master configuration
window.The description and the station address can be set in this window.
Set the Auto addressing check box. Note: automatic addressing is recommended for
the DP Master.The addresses are allocated from 0 and incremented in accordance with
the entry sequence of the Slaves before downloading and can be viewed and checked in
the View > Address Table. Click OK
Figure 7: Master configuration
Figure 8:The insert slave button The insert slave pointer