Westermo GS-01 - Manual (Page 18)

18 6195-2201
+CLCK – Facility lock
This command shall be used by the application to lock, unlock or interrogate a ME
or network facility <fac>.
Command syntax: AT+CLCK= <fac>,<mode>[,<passwd>[,<class>] ]
Response syntax: +CLCK: <status> [ ,<class1> ]
<CR><LF>+CLCK: <status>,<class2>
[ … ] ]
Command Possible responses
AT+CLCK=”SC”,1,1234 OK
Note: Enable PIN Note: PIN was right
AT+CLCK? +CLCK: (”PS”, 0), (”PN,0),(”FD”,0)
Note: Read PIN status OK
Note: PIN is enables, no SIM lock, no network lock, no
informati_n on Call barring
(no longer supported in GSM 07.07)
AT+CLCK=”SC”,0,5555 +CME ERROR: 16
Note: Disable PIN Note: PIN was wrong
AT+CPIN=1234 OK
Note: Enter PIN Note: PIN was good
AT+CLCK=? +CLCK:(”PS”,”SC”,”AO”,”OI”,”OX”,”AI”,”IR”,”AB”,
Note: Request supported OK
facilities Note: Supported facilities
AT+CLCK=”PN”,1,12345678 OK
Note: Activate network lock
Network lock activated
AR+CLCK=”AO”,1,1234,2 OK
Note: Activate all outgoing Note: Call barring is activate
calls barring for data calls
AT+CLCK=”AO”,2 <CR><LF> +CLCK: 1,2
Note: Query BAOC status OK
Note: BAOC activate for data calls only