Westermo GS-01 - Manual (Page 32)

32 6195-2201
Q – Result code suppression
Determines whether the mobile sends result codes or not.
Application to GSM ATQ0 DCE transmits result codes
GSM to application OK Command valid
Application to GSM ATQ1 Result codes are suppressed and
not transmitted
GSM to application (none) No response
V – DCE response format
Determines the DCE response format, with or without header characters
<CR><LF>, and with the use of numeric result codes.
V0 V1
Information <text><CR><LF> <CR><LF>
responses <text><CR><LF>
Result codes <numeric code><CR> <CR><LF>
<verbose code><CR><LF>
Application to GSM ATV0 DCE transmits limited headers
and trailers and numeric result
codes
GSM to application 0 Command is valid (0 means OK)
Application to GSM ATV1 DCE transmits full headers and
trailers and verbose response text
GSM to application OK Command is valid
Z – Default configuration
Restores the configuration profile. Any call is released.
Application to GSM ATZ
GSM to application OK Command valid
&W – Save configuration
This commands writes the active configuration to a non-volatile memory (EEPROM).
Application to GSM AT&W Writes current configuration
to EEPROM
GSM to application OK Command valid