ACTi Queue Management Server 1 - Manual (Page 20)

www.acti.com
ACTi Queue Management Server 1 User’s Manual
20
Add Video Source
Now that you have your ACTi Queue Management Server 1 open, you are ready to add some
video sources so that they can be analyzed!
Before adding a video source, make sure you have a working NVR Server or camera and
confirm its following properties: (1) IP Address, (2) HTTP Port, (3) Account Name and (4)
Password.
To add an NVR server as a video source, follow these steps:
1. Right-click on the Source List Window, and select “Add New NVR/ENR”.
2. After selecting “Add New NVR/ENR”, a popup window will appear as shown below.