Add video source, Act i alpr server 1 user’s manual – ACTi ALPR Server 1 V1.0.1 User Manual
Page 17
Advertising
ACT
i ALPR Server 1 User’s Manual
Add Video Source
Now that you have your
ACTi ALPR Server 1
open, you are ready to add some video sources
so that they can be analyzed!
Before adding a video source, make sure you have a working NVR Server or camera and
confirm its following properties:
(1)
IP Address
,
(2)
HTTP Port
,
(3)
Account Name
and
(4)
Password
.
To add an NVR server as a video source, follow these steps:
1.
Right-click
on the
Source List Window
, and select
“Add New NVR”
.
2.
After selecting
“Add New NVR”
, a popup window will appear as shown below.
Advertising