Act i alpr server 1 user’s manual – ACTi ALPR Server 1 V1.0.1 User Manual
Page 25
Advertising
ACT
i ALPR Server 1 User’s Manual
3.
A
New Analysis Window
will appear, in which you can select the time interval you
wish to analyze. To set your time interval, follow the steps below:
1.
Set the beginning of the interval by
right-clicking
on any location on the
Time
Bar
, and selecting
“Set as Begin
”.
z
2.
Set the end of the interval by
right-clicking
on any location on the time bar,
and selecting “
Set as End
”.
3.
The selected area should appear highlighted in green. To clear or edit your
selection,
right-click
and select
“
Clear
” to set a new time interval.
Minimum
Plate Size
Maximum
Plate Size
Maximum
Plate Size
Minimum
Plate Size
Maximum
Plate Size
Advertising