Alinco DJ-X2000 - Manual (Page 14)

13
1.4 Setting up the DJ-X2000
Before using your receiver, attach the included antenna securely. If you want to
use the belt clip or wrist strap, attach them too.
1.4.1 Attaching the antenna
Fit the base of the antenna over the
projections on the connector, press
downward and turn clockwise. Check to
be sure the antenna is securely attached.
1.4.2 Attaching the belt clip
Screw the belt clip onto the rear panel
(screws x 2). Check to be sure the clip is
securely attached before use.
1.4.3 Attaching the wrist strap
Fit the wrist strap under the belt clip and
pull it through its own loop.
POW ER
RX/S T
PMS
VFO
MR M W
A B
SET MON
I
F
SRCH
SQ
L VO
L
P
CLN S P