Exit the recording mode. press the key, Playing back the recorded sound, S t o p – Alinco DJ-X2000 User Manual
Page 59: P l a y
58
3
Stop or pause the recording.
To stop the recording, press the
key.
To pause (temporarily stop) the recording, press the
key. If you press the
key again, the recording is resumed.
When the recording time reaches 160 seconds, “
END
” appears on the display
and the recording stops automatically.
4
Exit the recording mode.
Press the
key.
Note:
• Only a single session of sound can be recorded.
• No other function can be used during the recording.
• The sound volume can be controlled in the recording mode.
• Sound can be repeatedly recorded approximately 10,000 times.
• The RX AF recording starts when sound signal is received.
• Playing back the recorded sound
1
Call up the recording screen.
Press the
key, and then press
the key
while
is
shown
on the display.
The recording screen will appear.
2
Start the playback.
Press the
key. The playback will start and the
elapsed time will appear on the display.
3
Stop or pause the playback.
To stop the playback, press the
key.
To pause (temporarily stop) the playback, press the
key.
If you press the
key again, the playback is resumed.
After all the recorded sound has been played back, “END” appears on the
display and the playback stops automatically.
4
Exit the recording mode.
Press the
key.
Note:
• No other function can be used during playback.
• No battery backup is required to store the recorded data.
• If the all reset function is used, the recorded data is erased.
CLR
SKIP
F TUNE
2
STEP
3
ATT
0
REC
F
MODE
AUTO
MW
J X2
MIC
SCRT
PRIO
REC
CTCSS
F TUN
E
A-B S
M NAM
E
TF
SKIP
STEP
ATT
SET
POW
ER
PMS
VFO
MR M
W
A B
SET
KL
3
6
9
8
0
5
2
1
4
CLR
ENT
MIC
SCN
RF C
HELP
7
MON
I
F
SRC
H
LAMP
SQL VOL
DOW
N
UP
CLR
SKIP
F TUNE
1
2
S T O P
3
P L A Y
.
P U A S E
D E
L
R E C
P L A Y I N G
5 s
F TUNE
F TUNE
2
STEP