30 directly changing the settings, On off d i rect wr – Alinco DJ-X2000 User Manual
Page 61
60
3.1.30 Directly changing the settings
This function allows you to enable/disable the direct changes of the settings for
modulation mode, frequency step, attenuator, and CTCSS decoding function in
the MR or PMS modes. When it is turned ON, the settings for modulation mode,
frequency step, attenuator, and CTCSS decoding function can be directly
changed in the currently displayed MR or PMS mode.
1
Call up the DIRECT WR screen.
Press the
key, and then press
the key
while
is
shown
on the display.
The MENU will appear. Point the
arrow at
+CONFIG
using the dial or
UP/DOWN
key, and
then press the
key.
The CONFIG screen will appear. Point the arrow at
+DIRECT WR
and then press the
key.
The DIRECT WR screen will appear.
2
Selecting ON/OFF for DIRECT WR.
Point the arrow at
ON
or
OFF
using the dial or
UP/DOWN
key, and then press
the
key (the initial setting is
OFF
).
The display will return to the CONFIG screen. Point the arrow at
END
and then
press the
key (Alternatively, you may press the
key, and then press the
key while
is shown on the display).
Note:
If you exit the CONFIG screen by pressing the
key, the changed
settings are canceled.
CLR
SKIP
ENT
TF
F
ENT
TF
ENT
TF
ENT
TF
ENT
TF
HELP
SET
F
MODE
AUTO MW
MIC
CTCSS
A-B S
M NAME
STEP
ATT
SET
POW
ER
PMS
VFO
MR M
W
A B
SET
KL
3
6
5
2
1
4
SCN
RF C
HELP
MONI
F
SRCH
LAMP
SQL VOL
DOWN UP
ON
OFF
D I RECT WR