22 setting search resume condition (srch mode), I n t erv a l con t i nue ch scope – Alinco DJ-X2000 User Manual
Page 49
48
3
Specify a priority interval.
Specify a priority interval in a range between 1 and 20 seconds in 1-second
steps using the
UP/DOWN
key, and then press the
key (the initial setting is
5s
).
The display will return to the PRIO menu. Point the arrow at
END
and then press
the
key (Alternatively, you may press the
key, and then press the
key while
is shown on the display).
Note:
If you exit the PRIO menu by pressing the
key, the changed setting is
canceled.
3.1.22 Setting search resume condition
(SRCH MODE)
For the DJ-X2000 to perform the Channel Scope function, its receiver is used for
searching for signals, and the sound will be intermittent at the moment when the
search takes place.
This setting determines how often the search takes place in the Channel Scope
function. This is referred to as the “search mode”.
1
Call up the CH SCOPE menu.
Press the
key, and then
press the
key while
is
shown on the display.
The MEMU will appear. Point the
arrow at
+CONFIG
using the dial or
UP/DOWN
key, and
then press the
key.
The CONFIG menu will appear. Point the arrow at
+CH
SCOPE
and then press the
key.
The CH SCOPE menu will appear.
ENT
TF
ENT
TF
HELP
SET
F
MODE
AUTO MW
MIC
A-B S
M NAME
STEP
ATT
SET
POW
ER
PMS
VFO
MR M
W
A B
SET
KL
3
6
2
1
RF C
HELP
MONI
F
SRCH
LAMP
SQL VOL
DOWN UP
CLR
SKIP
F
ENT
TF
I N T ERV A L
CON T I NUE
CH SCOPE
ENT
TF
ENT
TF