Allmand Brothers MLEX20-30KW V - Manual (Page 13)

12 12 13
MODEL AND SERIAL NUMBERING SYSTEM
SERIAL NUMBER LOCATION
Trailer: All MAXI-LITE EX V-SERIES models
have a serial number plate located adjacent to the
right taillight on the rear panel.
Generator: Plate attached to the side of the gen-
erator housing.
Engine: Plate attached to the engine.
KUBOTA V2203, V2003T and V3300:
Left side, between
manifold and starter.
ISUZU 4LE1: Upper right front corner
behind injector pump
DESCRIPTION OF MODELS AND OPTIONS
The standard MAXI-LITE ML20EX and ML30EX V-Series light towers use four 1250 watt
Metal Halide lamps with the exclusive Allmand SHO-HD lighting system to produce a total of
600,000 lumens (150,000 lumens per fixture). Optional reflective visors are available. The
lights are mounted on a seven-section telescoping mast, which is raised using a 12-Volt DC
hydraulic power unit to actuate a hydraulic lift cylinder. The tower’s power cord is managed
by a bi-directional cord reel to prevent tangling or stretching. Optional inside fixture storage
is offered on four light models.
The heavy duty trailer assembly forms a fluid containment system, to minimize the environ-
mental impact of a spill or leak. The doors and roof panels are formed from 12-gauge
steel. A torsion-flex axle, with 15” load-range D tires and wheels, is equipped with electric
brakes. The trailer enclosure has 12 gauge doors and roof panels. The front panels are
reversible. The MAXI-LITE ML EX V-Series light towers are powered by either a Kubota
V2203, V2003T or V3300, or Isuzu 4LE1 diesel engine mounted on a modular tray
assembly. A 20kW (ML20EX) or 30kW (ML30EX) 3-Phase AC generator is mated to the
engine. Diesel fuel for the engine is supplied by an integral 135-gallon (nominal) fuel tank.