Allmand Brothers MLEX20-30KW V - Manual (Page 14)

14 14
OPERATION AND SPECIFICATIONS
ELECTRICAL
Hard wired electrical circuits
Easily serviceable componentized ballast
assemblies.
Ground rod
Hour meter.
External 120V and 240V outlets and
3-Phase connection box
FLOOD LIGHT ASSEMBLY
Four 1250 watt lamp fixtures sealed for all
weather use are standard. Optional config-
urations include 1000 watt metal halide or
high-pressure-sodium (HPS) lamps in the
Allmand SHO fixture. UL Listed Luminaires
are available.
SHO 1250 FIXTURE - Exclusive Allmand
1250 Watt metal halide BT-37 size lamp
with mogul mounting base.
Lumen rating: 150,000 initial lumens
Warm-up time: 2-4 minutes
Restart time: 10-15 minutes
NOTE: Metal Halide lights and High Pres-
sure Sodium (HPS) lights use different bal-
lasts and starters. Therefore, it is not advis-
able to interchange bulb types.
MAST
Seven-section formed steel tube mast,
which can be extended to over 26 feet.
The mast extends hydraulically and the
mast assembly includes self-lubricating
nylon wear guides. The light bar can be ro-
tated nearly 360° for directional coverage.
TRAILER
The complete genset is housed within a
lockable enclosure. The unitized
frame/enclosure assembly is fabricated
from heavy gauge steel, designed
to contain fuel or oil spills, and is mounted
on a two-wheel torsion-flex axle with
electric brakes.
This design enables the trailer to
compactly contain the four outriggers.
The mast is centered near the middle
of a five-point outrigger system
for optimum balance and stability. This
system was engineered to allow the light
plant to remain operational in wind gusts
of up to 75 MPH when the mast
is extended to full operating height and
the outriggers are properly deployed and
set up; however, Allmand Bros. Inc.
recommends that the tower be fully
lowered if sustained winds over 65 MPH
are expected.
The trailer drawbar design includes an
adjustable-height reversible hitch that
features a combination 2” ball and 3” pintle
ring (lunette) hitch.
STABILIZERS
Five (5) point outrigger design (including
drawbar jack) with tower centrally located.