Allmand Brothers MLEX20-30KW V - Manual (Page 2)

22
INSPECTION CHECK LIST
PREPARING THE MAXI-LITE ML EX V-SERIES FOR SERVICE
The MAXI-LITE ML EX Series requires service as well as proper operation in order to pro-
vide the performance and safety it has been designed for. Never deliver or put a machine
into service with known defects or missing instructions or decals. Always instruct the cus-
tomer in the proper operation and safety procedures as described in the operator’s manual.
Always provide the manual with the equipment for proper and safe operation.
CHECK LIST:
 Visually inspect the equipment to ensure that all instructions and decals are in place and
legible.
 Check the hitch assembly and safety tow chains.
 Check the outriggers and jacks to make sure they operate properly.
 Inspect the light fixtures for visible damage and test for proper operation .
 Inspect the electrical wiring for signs of damage.
 Check the ground rod cable and the ground lug. Make sure they are clean, undam-
aged, and functional.
 Inspect the tires to ensure good condition and proper inflation.
 Check oil, fuel, coolant levels, and hydraulic fluid levels.
 Check to make sure the operator’s manual is with the equipment.
 Inspect the machine physically for damage and repair if necessary.
NOTE: See appropriate section of manual for scheduled maintenance intervals.
After completing the inspection check list, operate the tower through a complete op-
eration cycle, following the operating instructions in the operator’s manual.
WARNING
NEVER ALLOW ANYONE TO OPERATE THE EQUIPMENT WITHOUT
PROPER TRAINING!
ALWAYS READ THE INSTRUCTIONS FIRST!