H3C Technologies H3C S12500-X Series Switches - Manual (Page 125)

113
Step Command Remarks
7. Specify the maximum number
of login attempts and the
action to be taken when a
user in the user group fails to
log in after the specified
number of attempts.
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
By default, the login-attempt policy
of the user group equals the global
login-attempt policy.
81B
Setting local user password control parameters
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a device management
user and enter local user view. local-user user-name class manage
By default, no local user exists.
Local user password control
applies to device management
users instead of network access
users.
For information about how to
configure a local user, see
"
823H
Configuring AAA ."
3. Configure the password
expiration time for the local
user.
password-control aging aging-time
By default, the setting equals that
for the user group to which the
local user belongs. If no expiration
time is configured for the user
group, the global setting applies to
the local user.
4. Configure the minimum
password length for the local
user. password-control length length
By default, the setting equals that
for the user group to which the
local user belongs. If no minimum
password length is configured for
the user group, the global setting
applies to the local user.
5. Configure the password
composition policy for the
local user.
password-control composition
type-number type-number
[ type-length type-length ]
By default, the settings equal those
for the user group to which the
local user belongs. If no password
composition policy is configured
for the user group, the global
settings apply to the local user.
6. Configure the password
complexity checking policy
for the local user.
password-control complexity
{ same-character | user-name }
check
By default, the settings equal those
for the user group to which the
local user belongs. If no password
complexity checking policy is
configured for the user group, the
global settings apply to the local
user.