Destroying a local key pair, Displaying a host public key – H3C Technologies H3C S12500-X Series Switches User Manual
Page 133
121
225B
Displaying a host public key in a specific format and saving it
to a file
After you display a host public key in a specific format, save the key to a file and transfer the file to the
peer device.
To display a local host public key in a specific format:
Step Command
1.
Enter system view.
system-view
2.
Display local host public keys
in a specific format.
•
Display RSA host public keys:
public-key local export rsa [ name key-name ] { openssh | ssh1 |
ssh2 }
•
Display DSA host public keys:
public-key local export dsa [ name key-name ] { openssh | ssh2 }
226B
Displaying a host public key
Display a host public key and copy it to an unformatted file. You must literally enter the key on the peer
device.
Perform the following tasks in any view:
Task Command
Display local RSA public keys.
display public-key local rsa public [ name key-name ]
Display local DSA public keys.
display public-key local dsa public [ name key-name ]
NOTE:
Do not distribute the RSA server public key serverkey (default) to a peer device.
89B
Destroying a local key pair
To avoid key compromise, destroy a local key pair and generate a new pair after an intrusion event has
occurred, the storage media of the device is replaced, the key pair has been used for a long time, or the
local certificate has expired.
To destroy a local key pair:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Destroy a local key pair.
public-key local destroy { dsa |
ecdsa | rsa } [ name key-name ]
N/A