Packet formats, Verifying the configuration – H3C Technologies H3C S12500-X Series Switches User Manual
Page 91
79
# Enable 802.1X on port Ten-GigabitEthernet 1/0/1.
[Device] interface ten-gigabitethernet 1/0/1
[Device-Ten-GigabitEthernet1/0/1] dot1x
[Device-Ten-GigabitEthernet1/0/1] quit
# Enable MAC-based access control on the port. (Optional. MAC-based access control is the
default setting.)
[Device] interface ten-gigabitethernet 1/0/1
[Device-Ten-GigabitEthernet1/0/1] dot1x port-method macbased
# Specify aabbcc.net as the mandatory domain.
[Device-Ten-GigabitEthernet1/0/1] dot1x mandatory-domain aabbcc.net
198B
Verifying the configuration
Use the display dot1x interface ten-gigabitethernet 1/0/1 command to verify the 802.1X configuration.
After an 802.1X user passes authentication, you can use the display dot1x sessions command to view the
user connection information.