H3C Technologies H3C S10500 Series Switches User Manual

Page 48

Advertising

Turn on the power source of the switch to power on the switch.
The following is a sample output you can see on the terminal:

System is starting...

Booting Normal Extend BootWare.

The Extend BootWare is self-decompressing...................................

.....Done!

****************************************************************************

* *

* BootWare, Version 1.32 *

* *

****************************************************************************

Compiled Date : Mar 11 2014

CPU Type : XLP316

CPU Clock Speed : 1200MHz

Memory Type : DDR3 SDRAM

Memory Size : 8192MB

Memory Speed : 667MHz

BootWare Size : 1536KB

Flash Size : 500MB

BASIC CPLD Version : 3.0

EXTENDED CPLD Version : 3.0

PCB Version : Ver.A

BootWare Validating...

Press Ctrl+B to enter extended boot menu...

Starting to get the main application file--flash:/ S10500.bin!................

.........................................................................

The main application file is self-decompressing.............................

............................................................................

..Done!

System application is starting...

Starting to get the main application file--flash:/ S10500.bin!................

..........................................................................

The main application file is self-decompressing.............................

............................................................................

.....Done!

System application is starting...

User interface aux0 is available.

Press ENTER to get started.

Press Enter at the prompt. When the prompt

appears, you can configure the switch.

After powering on the switch, check the following items:

•

The cooling system is working, and you can hear fan rotating noise and feel air being blown out.

•

The system status LEDs on the MPUs show that the system is operating correctly. For more
information about LED behaviors, see "

Advertising