H3C Technologies H3C MSR 50 - Manual (Page 24)

1-23
l Figure 1-16 Client access contro
AC
AP 1
RADIUS server
Internet
AP 2
Client 1
Client 2
Client 3
Configuring an AP Group
Follow these steps to configure an AP group:
To do… Use the command… Remarks
Enter system view system-view —
Create an AP group and enter
AP group view
wlan ap-group value —
Add specified APs into the AP
group
ap template-name-list
Required
No AP is added by default.
You can use this command
repeatedly to add multiple
APs, or add up to 10 APs in
one command line.
A nonexistent AP can be
added.
Configure a description for the
AP group
description text
Optional
Not configured by default.
Applying the AP Group in a User Profile
Follow these steps to apply the AP group in a user profile:
To do… Use the command… Remarks
Enter system view system-view —
Enter user profile view user-profile profile-name
Required
If the user profile does not
exist, you need to create it
first.
Apply the AP group in the user
profile
wlan permit-ap-group value
Required
No AP group is applied in the
user profile by default.