Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 138)

138 KARRERA — User Manual
Section 4 — Switcher Control
Figure 66. Macros Catalog Menu
1. Go to the Macro Catalog menu (press Macro , Catalog ).
2. Touch the Macro Register number button of the register you wish to
record into, in the scrolling list.
3. Touch the Record button.
4. Perform the steps you wish recorded into the macro, in the order they
are to be performed, using the Control Panel and/or the menus.
5. Touch the Stop button to end the macro recording.
You can name the macro either before you record it, or after by touching the
name data pad for that macro register to bring up a keypad.
Panel Name
The “Panel Name” column is provided in the Macro Catalog menu’s,
Macro List pane (refer to
Figure 66 ), for entering a Panel Name (four char-
acters maximum). Karrera displays that name in place of the Macro Reg-
ister Number in the Local E-MEM area (when the Macro menu is delegated
by pressing the
Macro button in that ME).