Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 80)

80 KARRERA — User Manual
Section 3 — Video Mix/Effects
Figure 36. Mode Menu, Secondary Partition Visible on Primary Partition
Split Layered Mode
With iDPM, you can layer Keys 1-4 with iDPMs for each ME. See ME Split
Mode Operation
on page 269 .
Transform Controls
The Source and Target transform controls below the delegation matrix del-
egate what 3-D transformation will be controlled with the soft knobs or
pop-up keypad entry. Selecting one of the transform buttons activates the
soft knobs on the right side of the Menu Panel to control specific parame-
ters of that transform and delegates the Path Control pane to that trans-
form.
The transform controls are organized on the menu according to Source and
Target space capabilities.
The Locate , Locate Axis , Target Rotate , and Spin transforms can be assigned to
work in either source or target space with the touch buttons at the lower-
left of their pane. Selecting the
Source button provides image adjustment
using that channel’s coordinate system for reference. Selecting the Target
button provides image adjustment using the screen as the reference. Only
one space button is selectable at a time.