Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 26)

26 KARRERA — User Manual
Section 2 — User Setups and Preferences
Source Button Mapping
On the Karrera system, each bank on the Control Panel (Source Select areas)
can have its own independent source-to-button mapping, if desired, as well
as each Remote Aux Panel. Typically button mappings on the Control Panel
are set the same, for operating simplicity. However, in some situations indi-
vidual bank mapping can be advantageous. For example, on a show with a
large number of sources you can place all the DDR and VTR sources on one
bank, all the cameras on another bank, etc., and then have direct access to
any desired source. If you use this feature, source names should be defined
for all sources on all banks so the different sources can be identified.
The Button Mapping menu is accessed by touching User Setups , Panel Prefs ,
Button Mapping ( Figure 8 ).
Figure 8. Button Mapping Menu
The Banks delegation buttons ( Figure 8 ) are used to select the device to be
mapped.