Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 28)

28 KARRERA — User Manual
Section 2 — User Setups and Preferences
The Remote Aux Button Map menu is accessed by touching Eng Setup ,
Node Settings , Remote Aux Button Map ( Figure 9 ).
1. Individual Remote Aux Panels are selected by touching the buttons in
the left pane. Select the
Multi Select button for group selection ( Figure 9 ).
Figure 9. Remote Aux Panel Button Map Menu
2. When multiple Remote Aux Panels are selected, changing a button’s
mapping applies that individual button’s mapping to all the selected
Remote Aux Panels.
3. Use the same button mapping procedure ( page 27 ) to map the source
buttons on the Aux panel. Select the Aux source button in the central
pane, then select the Karrera source in the right pane.
Note Button mapping settings for Remote Aux Panels assigned to a Control
Surface are saved to the Panel Prefs configuration file. Button mapping set-
tings for Independent Remote Aux Panels are saved to the Eng Setup config-
uration file.