Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 66)

66 KARRERA — User Manual
Section 3 — Video Mix/Effects
Figure 27. Keyer Priority Menu, Current Stack Selected
2. If not already set up, turn on the desired keys and arrange them so they
overlap, observing the Program monitor. This will make the changes in
key priority visible. For demonstration purposes, you can use four
preset pattern keys.
3. Select the keyer you wish to move in the stack in the Current column,
then use the
Top , Move Up , Move Down , and Bottom buttons on the left to
place the key in the desired location. The key priority order changes
immediately, as a cut.
To Transition Between Different Keyer Priorities:
Key priority transitions use a Current priority stack and a Next priority
stack. The transition occurs between the two stacks.
1. Press the Key Prior Transition Element button in the Transition area
(button row under status display, far left function button).
2. If not already set up, turn on the desired keys and arrange them so they
overlap, observing the Program monitor. This will make the changes in
key priority visible. For demonstration purposes, you can use four
preset pattern keys.
3. Delegate that ME for preview in the Preview button group on the
System Bar. This shows the end result of the transition (the Next
priority).