Epson 73c - Manual (Page 22)

16 Setting Up the Projector
Connecting the RCA Video Cable
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1. Connect one end of the yellow RCA plug to the projector’s Video
jack.
2. Connect the other end of the plug to the video-out jack on your
video source.
3. Connect the red and white plugs on the RCA A/V cable to the
projector’s Audio2 L (white) and R (red) jacks.
4. Connect the red and white plugs on the other end of the cable to
the corresponding audio output jacks on your video source.