Epson 73c - Manual (Page 35)

Using the Projector 29
Shutting Down the Projector
When you’ve finished using the projector, follow the recommended
procedure to shut it down. This extends the life of the lamp and
protects the projector from possible overheating.
1. If you’re using a computer, shut it down first.
2. To turn off the projector, press the P Power button on the
projector or remote control. You see a confirmation message. (If
you don’t want to turn it off, press any other button.)
3. Press the P Power button again. The power light flashes orange
for about forty-five seconds as the projector cools down. When
the projector has cooled, the orange light stays on and the exhaust
fan shuts off.
If you want to turn the projector on again, wait until the orange
light stops flashing. Then press the P
Power button.
note
When the projector has not
received any input signals for
30 minutes, it automatically
turns off the projector lamp
and enters “sleep mode.” This
conserves electricity, cools the
projector, and extends the life
of the lamp. If you are done
using the projector, unplug
the power cord. If you want
to start projecting again, press
the P
Power button.
Color Mode Computer
Menu A/V Mute
E-Zoom
Freeze
S-Video/Video
Page up Page down Power
ESC Auto
Enter